西门子代理商ET200总线适配器BA2RJ45

SIMATIC BusAdapter BA 2xFC，用于通过 FastConnect 连接直接铺设 PROFINET 电缆

SIMATIC BusAdapter BA LC/RJ45，用作系统集成的介质转换器，从铜 (RJ45) 到纤维 (LC)

ET 200SP BusAdapter "BA-Send" 用于通过 ET 200AL 模块扩展 ET 200SP 站

对于 SIMATIC ET 200SP，有两种类型的 BusAdapter (BA) 可供选择：

ET 200SP BusAdapter "BA-Send" 
用于扩展 ET 200SP 站，多可扩展 ET 200AL I/O 系列中的 16 个模块，并通过 ET 连接提供 IP67 保护

SIMATIC BusAdapter
可自由选择与具有 SIMATIC BusAdapter 接口的设备的连接系统（可插拔或直接连接）和物理 PROFINET 连接（铜缆、POF、HCS 或玻璃纤维）。
SIMATIC BusAdapter 的一个优点：以后转为采用坚固的 FastConnect 技术或光纤连接，或维修有故障的 RJ45 接口时，只需换该适配器即可。

ET 200SP BusAdapter “BA-Send"

BA-Send BusAdapters are used whenever an existing ET 200SP station is to be expanded with IP67 modules of the SIMATIC ET 200AL.

The SIMATIC ET 200AL is a distributed I/O device with degree of protection IP65/67 that is easy to operate and install. Due to its high degree of protection and ruggedness as well as its small dimensions and low weight, the ET 200AL is especially suitable for use at the machine and on moving plant sections. SIMATIC ET 200AL enables the user to access digital and analog **s and IO-Link data at low cost.

SIMATIC BusAdapters

In standard applications with moderate mechanical and EMC loads, SIMATIC BusAdapters with an RJ45 interface can be used, e.g. the BusAdapter BA 2xRJ45.

For machines and systems in which higher mechanical and/or EMC loads act on the devices, a SIMATIC BusAdapter with connection via FastConnect (FC) or fiber-optic cable (SCRJ or LC) is recommended. Likewise, all SIMATIC BusAdapters with a fiber-optic cable connection (SCRJ, LC) can be used with the increased loads.

BusAdapters with connections for fiber-optic cables can be used to cover high potential differences between two stations and/or high EMC loads.

An overview of the essential properties of the PN interfaces is shown in the table below

ET 200SP BusAdapter "BA-Send"

紧接在“BU-Send” BU 上的前端站旁边

可以在“标准”功能类别或别的接口模块上使用

可在 CPU 1510SP (F) 和 CPU 1512SP (F) 以及 Open Controller 1515SP 上使用

SIMATIC BusAdapter

插到带 SIMATIC BusAdapter 的设备上，并且可配有用于识别设备的设备标签牌。

带铜接口的 BusAdapter 可在带 SIMATIC BusAdapter 接口的所有设备上使用。

带光纤接口的 BusAdapter 可在带 SIMATIC BusAdapter 接口的部分设备
（例如，具有“高性能”或以上功能级别的 ET 200SP 接口模块、CPU 1512SP (F) 等）上使用。

带两个 PN 铜接口（RJ45 M12 或 FastConnect (FC)）的型号：

带 2 个 RJ45 接口的 BA 2xRJ45

BA 2xM12，带 2 个 M12 推挽式接口

带 2 个 FastConnect 接口的 BA 2xFC

具有一或两个 PN 光纤电缆 (FOC) 连接的版本

BA 2xSCRJ，带 2 个 SCRJ 接口

BA SCRJ / RJ45，各带一个 SCRJ 和一个 RJ45 接口（介质转换器）

BA SCRJ / FC，带一个 SCRJ 接口和一个 FastConnect 接口（介质转换器）

BA 2xLC，带 二个 LC（Lucent 连接器）接口

BA LC / RJ45，各带一个 LC 和一个 RJ45 接口（介质转换器）

BA LC/FC，带一个 LC 接口和一个 FastConnect 接口（介质转换器）